COM Express 7 baseboard
The Baseboard supports Type 7 COM Express modules. The board breaks out major communications and peripheral interfaces as defined by the COM Express standard. It also provides a backplane connector, making it possible to integrate the board into larger systems. The SolidRun LX2160A COM Express module has been used in this project. The LX2160A features 16 Arm Cortex-A72 processors, 4 x 10GbE and 18x PCIe Gen 3.0 lanes and is fully supported in Linux.
Double COM Express 7 connector for the SolidRun LX2160A board
2x SFP+ 10 Gigabit Ethernet port
OCuLink PCIe x4 connector
2x USB 3.0 type A port
Gigabit RJ45 connector
Singular +12V supply voltage Nano-Fit connector
USB-C console output
2x M.2 2280 key M connector with PCIe x4
M.2 2230 key E connector with PCIe x1
SD card connector
Backplane PCB edge connector with PCIe x2, USB 2.0 and UART console
Temperature and fan monitor/controller with 3x 12V, 4-pin, Molex KK fan connectors
2x RGB LED for status indication
Board power/current monitors
Board EEPROM and support for carrier MAFS BIOS
Image | Manufacturer | Manufacturer part number | Description | Data available |
---|---|---|---|---|
Name | Type | Material | Thickness[mm] | Constant |
---|---|---|---|---|
F.Mask | Top Solder Mask | 0.01 | ||
F.Cu | copper | 0.035 | ||
dielectric 1 | prepreg | FR4 | 0.1 | 4.5 |
In1.Cu | copper | 0.035 | ||
dielectric 2 | core | FR4 | 0.3 | 4.5 |
In2.Cu | copper | 0.035 | ||
dielectric 3 | prepreg | FR4 | 0.1 | 4.5 |
In3.Cu | copper | 0.035 | ||
dielectric 4 | core | FR4 | 0.3 | 4.5 |
In4.Cu | copper | 0.035 | ||
dielectric 5 | prepreg | FR4 | 0.1 | 4.5 |
In5.Cu | copper | 0.035 | ||
dielectric 6 | core | FR4 | 0.3 | 4.5 |
In6.Cu | copper | 0.035 | ||
dielectric 7 | prepreg | FR4 | 0.1 | 4.5 |
B.Cu | copper | 0.035 | ||
B.Mask | Bottom Solder Mask | 0.01 |