Kria K26 Devboard
A devboard created for AMD-Xilinx Kria K26 System on Module (SoM), aimed at hardware accelerated vision AI and video analytics solutions.
The board includes a 50-pin camera connector which exposes two 4-lane MIPI CSI-2 interfaces. This camera connector is electrically compatible with a broad range of open source video accessories created by Antmicro, such as OV9281 Dual Camera Board, SDI-MIPI bridge and HDMI-MIPI bridge.
The board supports multiple power supply scenarios, including PoE (Power over Ethernet), USB-C PD (Power Delivery), and External PSU via DC Jack.
You can read more about the devkit in this Antmicro blog note.
Compatible with Kria SOM Carrier Card
Three independent sources of power
PoE from TE Connectivity 5-2337992-8 utilizing Texas Instruments TPS2378 PoE PD Interface and CUI PDQE30-Q48-S12-D isolated DC/DC converter
USB-C PD exposed on GCT USB4105-GF-A USB-C connector utilizing FTDI FT4232HPQ
6-15V DC input via Multicomp MJ-179PH jack connector
AMD-Xilinx Kria K26 SoM connected with two SAMTEC ADM6-60-01.5-L-4-2-A-TR connectors
1x 1GbE interface implemented with Texas Instruments DP83867CRRGZR triple-speed Ethernet PHY transceiver chip and integrated magnetics and PoE TE Connectivity 5-2337992-8 RJ45 connector
1x DisplayPort 1.2 output available on Molex 47272-0001 connector
4x USB [host] 3.2 Gen 1 available via 6 port Microchip USB7016_KDX hub and Microchip USB3310C-CP PHY exposed on two Amphenol GSB3112311HR connectors
1x USB [client] Type-C exposed on GCT USB4105-GF-A connector for FTDI FT4232HPQ JTAG and debug
M.2 key E for optional WiFi and Bluetooth connectivity exposed on TE Connectivity 2199119-6 connector
2x 4-lane MIPI CSI-2 camera interface exposed on Würth Elektronik 68715014522 connector
One PMOD exposed on SAMTEC SSW-106-02-G-D-RA connector
1x SD 3.0 MicroSD UHS-1 exposed on Amphenol 1140084168 connector
Image | Manufacturer | Manufacturer part number | Description | Data available |
|---|---|---|---|---|
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
| ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
| ||||
 | ||||
 | ||||
 | ||||
| ||||
 | ||||
 | ||||
| ||||
 | ||||
| ||||
| ||||
| ||||
| ||||
 | ||||
 | ||||
| ||||
 | ||||
 | ||||
| ||||
| ||||
| ||||
 | ||||
| ||||
 | ||||
 | ||||
| ||||
 | ||||
 | ||||
 | ||||
 | ||||
| ||||
 | ||||
| ||||
| ||||
 | ||||
 |
Name | Type | Material | Thickness[mm] | Constant |
|---|---|---|---|---|
F.Mask | Top Solder Mask | 0.01 | ||
F.Cu | copper | 0.035 | ||
dielectric 1 | prepreg | PR2116 | 0.12 | 4.3 |
In1.Cu | copper | 0.018 | ||
dielectric 2 | core | IS400 | 0.2 | 3.9 |
In2.Cu | copper | 0.018 | ||
dielectric 3 | prepreg | PR2116 | 0.12 | 4.3 |
In3.Cu | copper | 0.018 | ||
dielectric 4 | core | IS400 | 0.2 | 3.9 |
In4.Cu | copper | 0.018 | ||
dielectric 5 | prepreg | PR2116 | 0.12 | 4.3 |
In5.Cu | copper | 0.018 | ||
dielectric 6 | core | IS400 | 0.2 | 3.9 |
In6.Cu | copper | 0.018 | ||
dielectric 7 | prepreg | PR2116 | 0.12 | 4.3 |
B.Cu | copper | 0.035 | ||
B.Mask | Bottom Solder Mask | 0.01 |
