Optiga TPM
This project contains open hardware design files for a Trusted Platform Module 2.0 based on the SPI-connected Infineon OPTIGA TPM SLB 9672. It can be used for embedded systems, IoT, networking equipment, telecommunications infrastructure and consumer electronics. It provides a foundation for securely establishing the identity and software status of connected devices. The board connects to a host via the SPI protocol and 3 GPIO pins. The Optiga TPM can be connected to various platforms with the ERF5 40-pin board to board connector. All signals are exposed on testpads.
Trusted Platform Module (TPM) 2.0 compliant
PQC-protected firmware update mechanism
40-pin ERF5 connector (compatible with Antmicro CM4 Baseboard)
All signals exposed on testpads
20 x 29 mm (0.78 x 1.14 inch) PCB outline
Image | Manufacturer | Manufacturer part number | Description | Data available |
|---|---|---|---|---|
 | ||||
 | ||||
 | ||||
 | ||||
| ||||
 | ||||
| ||||
|
Name | Type | Material | Thickness[mm] | Constant |
|---|---|---|---|---|
F.Mask | Top Solder Mask | 0.01 | ||
F.Cu | copper | 0.035 | ||
dielectric 1 | core | FR4 | 1.55 | 4.5 |
B.Cu | copper | 0.035 | ||
B.Mask | Bottom Solder Mask | 0.01 |
