PMOD I3C Driver
This expansion board provides two push-pull digital output drivers composed of discrete MOSFETs. The board is designed to work with FPGA-driven systems to implement I3C output stage drivers which can act as open drain or push-pull. The driver topology is switchable via digital control signals from the FPGA side. A separate set of control signals allows activating pull-up or pull-down resistors connected to the output signals.
Two independent digital output stages configurable as push-pull or open drain
Switchable pull-up and pull-down resistors
The board is compatible with PMOD (3.3V logic) expansion connector
The board is compatible with a 24-pin proto header (J3) available on the AMD (Xilinx) ZCU106 Evaluation Kit
Image | Manufacturer | Manufacturer part number | Description | Data available |
---|---|---|---|---|

Name | Type | Material | Thickness[mm] | Constant |
---|---|---|---|---|
F.Mask | Top Solder Mask | 0.01 | ||
F.Cu | copper | 0.035 | ||
dielectric 1 | core | FR4 | 0.48 | 4.5 |
In1.Cu | copper | 0.035 | ||
dielectric 2 | prepreg | FR4 | 0.48 | 4.5 |
In2.Cu | copper | 0.035 | ||
dielectric 3 | core | FR4 | 0.48 | 4.5 |
B.Cu | copper | 0.035 | ||
B.Mask | Bottom Solder Mask | 0.01 |
PMOD I3C Driver