TDK
C1005X6S1A105K050BC

SMD Multilayer Ceramic Capacitor, 1 µF, 10 V, 0402 [1005 Metric], ± 10%, X6S, C

Download component assets

Blender model 0.15 MB

Render in front-iso view

Render in front-iso view

Related boards

CM4 Baseboard

Baseboard supporting System on Modules (SoMs) with Raspberry Pi Compute Module rev. 4.0 (CM4) pinout.
CM4 Baseboard LVDS Adapter

Open source low-voltage differential signaling (LVDS) display adapter designed for bridging Antmicro’s CM4 Baseboard and an LCD panel with a touchscreen interface. The adapter converts MIPI DSI video input into single channel LVDS output and provides additional circuitry for integrating custom displays.
COM Express 7 baseboard

The Baseboard supports Type 7 COM Express modules. The board breaks out major communications and peripheral interfaces as defined by the COM Express standard. It also provides a backplane connector, making it possible to integrate the board into larger systems. The SolidRun LX2160A COM Express module has been used in this project. The LX2160A features 16 Arm Cortex-A72 processors, 4 x 10GbE and 18x PCIe Gen 3.0 lanes and is fully supported in Linux.
Composite Video (CVBS) to MIPI CSI-2 Bridge

An open source video bridge converting the analog composite video (CVBS) standard into MIPI CSI-2. The video conversion is handled with Analog Devices ADV7828-M 10-bit 4x Oversampled SDTV Video Decoder. This video accessory is electrically compatible with several video processing platforms created by Antmicro, such as Jetson Baseboards, Google Coral Baseboard, Snapdragon Baseboards and the AMD-Xilinx Kria K26 DevBoard.
D1600E PSU Breakout Board

Power Supply Unit (PSU) breakout board compatible with Dell D1600E-S0 PSU.
Data Center RDIMM DDR4 Tester

An experimental platform for development of RAM controllers supporting RDIMM DDR4 RAM modules commonly used in data centers, built around the Xilinx Kintex-7 FPGA. This hardware platform is used in Antmicro's and Google's Rowhammer testing framework which can be used to perform (and potentially mitigate) Rowhammer-type attacks on DRAM memories. You can learn more about Rowhammer and our work towards mitigating it in a Google Open Source blog note describing a related platform. You can read more about this board in this Antmicro blog note.
Data Center RDIMM DDR5 Tester

This board allows you to develop and customize RAM controllers to implement countermeasures against Rowhammer attacks and to experiment with RDIMM DDR5 RAM modules used in data centers. The latest revision of the board contains AMD (Xilinx) Artix UltraScale Plus series FPGA in a 676-BGA package. The previous revision of the board was based on AMD (Xilinx) Kintex-7 FPGA. The on-board configuration flash can store the bitstream that is loaded at startup. In addition, a 1Gb Ethernet interface is provided to access the DDR5 Tester over the local network infrastructure. The RDIMM DDR5 Tester includes on-board 64Mb HyperRAM for storing critical runtime data. The RDIMM DDR5 Tester is one of the DRAM testing platforms supported in the open source Rowhammer Tester framework. You can learn more about the RDIMM DDR5 Tester in this Antmicro blog note.
GMSL Deserializer Board

GMSL Deserializer Board capable of translating up to 4 GMSL signals into 2x 4-lane MIPI CSI-2 interface. The board is designed to connect to a baseboard, e.g. Jetson Orin Baseboard, via 50pin FFC.
Infrared Irradiance Probe

Simple detector of infrared (IR) radiation. It features two photodiodes with peak sensitivity of 900nm and 940nm, and signal-forming circuitry with adjustable gain. The board can be used for measuring relative intensity of IR radiation and for probing dynamic illumination parameters of infrared LEDs and laser modules.
Jetson Nano Baseboard

Open source baseboard supporting the NVIDIA Jetson Nano, Xavier NX, and TX2 NX SoMs. The board will let you take advantage of the processing power the Jetson Nano offers in numerous possible ways by exposing several interfaces, e.g. the board can be interfaced with MIPI CSI-2 video devices through a unified Flexible Flat Cable (FFC) connector, supporting up to 4 sensors in a 2-lane configuration or 3 sensors in a 4-lane configuration. Read more about the Jetson Nano Baseboard on Antmicro’s blog.
Jetson Orin Baseboard

World's first open-source baseboard supporting NVIDIA Jetson Orin Nano and Jetson Orin NX System-on-Modules, and successor to the greatly popular Jetson Nano Baseboard. The board will help you harness Orin NX's performance while offering plenty of flexibility - it can be powered using three possible sources (PoE included), features an array of interfaces, and offers compatibility with a range of video accessories developed by Antmicro (e.g. adapters for FRAMOS and Allied Vision cameras). All that while fitting within a 120 x 60 mm footprint. Read more about the Jetson Orin Baseboard on Antmicro's blog.
Jetson Orin Baseboard Storage Expansion Board

Expansion board compatible with Jetson Orin Baseboard. It ncludes a MicroSD card slot and an M.2 (key-M) slot intended for connecting additional storage solutions to the Jetson Orin Baseboard. The M.2 slot supports 2280 and 2242 M.2 NVMe discs.
Kintex K410T Devboard

A versatile development board employing one of the bigger FPGAs from the AMD-Xilinx Kintex-7 family. It includes additional external peripheral ICs and I/O connectors for fast-turnaround prototyping via expansion boards. The 10-layer PCB has a compact size of a nano-ITX board (120x120mm) and supports multiple power supply scenarios, including PoE (Power over Ethernet), USB-C PD (Power Delivery), and External PSU via DC Jack. The board also includes 8 indicator LEDs and multiple user inputs from 4 push buttons and 8 dip switches.
Kria K26 Devboard

A devboard created for AMD-Xilinx Kria K26 System on Module (SoM), aimed at hardware accelerated vision AI and video analytics solutions. The board includes a 50-pin camera connector which exposes two 4-lane MIPI CSI-2 interfaces. This camera connector is electrically compatible with a broad range of open source video accessories created by Antmicro, such as OV9281 Dual Camera Board, SDI-MIPI bridge and HDMI-MIPI bridge. The board supports multiple power supply scenarios, including PoE (Power over Ethernet), USB-C PD (Power Delivery), and External PSU via DC Jack. You can read more about the devkit in this Antmicro blog note.
LPDDR4 Test Board

An experimental platform built around the Xilinx Kintex-7 FPGA intended for development and customization of RAM controllers supporting LPDDR4 ICs. The board is supported by the Rowhammer Tester platform developed for mitigating memory vulnerabilities. Read more about the open source LPDDR4 test platform on Antmicro’s blog.
LPDDR5 Testbed

An experimental test module in a mechanical form of SO-DIMM DDR5. The module includes a standard 315-ball WFBGA (12.4mm × 15.0mm × 0.8mm, Ø0.42 SMD) LPDDR5 RAM footprint break-routed in the SO-DIMM edge connector. The design files were prepared in KiCad. Please note that this board is not electrically compatible with off-the-shelf SO-DIMM DDR5 memory modules. It is compatible with this test platform.
OV5640 Dual camera board

Dual camera module equipped with a pair of 5-megapixel OmniVision OV5640 image sensors. The board includes mounting holes for standard S-Mount (M12) lens holders. Each image sensor can be connected to a host platform via a separate 2-lane MIPI CSI-2 interface.
PolarFire SoM

Antmicro PolarFire System on Module (SoM) built around Microchip PolarFire MPFS250T RISC-V System on Chip. The SoM exposes two 100-pin high density connectors with signal assignment that is electrically compatible with Raspberry Pi Compute Module 4.
QuickFeather Development Board

The QuickFeather development board is based on the QuickLogic EOS S3 Sensor Processing Platform. It was designed by Antmicro in cooperation with QuickLogic. The board has been designed to keep compatibility with the Adafruit Feather ecosystem of evaluation boards, which allows the user to explore functionalities of the EOS S3 platform.
SA800U (Snapdragon 845) Baseboard

The Snapdragon 845 Baseboard is a compact-sized (100x70mm/4x2.75 inch) carrier board for the Quectel SA800U-WF System on Module. The SA800U-WF features an octa-core Qualcomm Snapdragon 845 System on Chip based on the Kryo 385 64-bit CPU and the Adreno 630 GPU. The SoC also includes radio transceivers for dual-band (2.4GHz/5GHz) WiFi and Bluetooth 5.0, while the SoM includes on-board antenna ports which simplify the antenna integration process.
SC606T (Snapdragon 625) Baseboard

The Snapdragon 625 Baseboard is a compact-sized (100x80mm/4x3.1 inch) carrier board for the Quectel SC606T System on Module. The SC606T features an octa-core Qualcomm Snapdragon 625 System on Chip based on the ARM Cortex-A53 64-bit CPU and the Adreno 506 integrated GPU. The SoC also includes radio transceivers for dual-band (2.4GHz/5GHz) WiFi, Bluetooth 4.2 and LTE Cat 6 modem, while the SoM includes on-board antenna ports which simplify the antenna integration process.
Scalenode CM4 Baseboard

A small and scalable open source compute node supporting System on Modules with pinout compatible with Raspberry Pi Compute Module 4 (CM4). Optimized for 19-inch rack mount installations for distributed multi-node computing systems, the board features an M.2 key M PCIe connector for SSD storage or add-on boards that can be used for AI acceleration. You can read more about the Scalenode CM4 Baseboard on Antmicro’s blog
SDI to MIPI CSI-2 bridge

Open source SDI to MIPI CSI-2 bridge. This device allows you to connect SDI inputs over long distances using a single coaxial cable to the otherwise short-range (but extremely popular and widely available) MIPI CSI-2 interface. Compatible with the (Jetson Nano Baseboard). You can read more about this board on Antmicro’s blog.
SDI to MIPI CSI-2 Converter

SDI-to-MIPI bridge based on the Lattice CrossLink-NX FPGA that allows SDI-based systems to harness the power of embedded AI platforms. It allows you to connect SDI inputs over long distances using a single coaxial cable to the otherwise short-range (but extremely popular and widely available) MIPI CSI-2 interface. The board has enabled various customer projects where the bridge is used together with Antmicro’s MIPI CSI-2 capable open hardware platforms, including the NVIDIA Jetson Baseboard or Snapdragon 845 Baseboard. You can read more about the board in this Antmicro blog note.
SO-DIMM DDR5 Tester

This board allows you to develop and customize RAM controllers to implement countermeasures against Rowhammer attacks and to experiment with SO-DIMM DDR5 modules. The board contains a Xilinx Kintex-7 series FPGA in a 676-BGA package and a single USB 2.0 interface that provides access to a 4-channel FTDI transceiver to enable FPGA reconfiguration and access to the debug console. The on-board configuration flash can store the bitstream that is loaded at startup. In addition, the board provides a 1Gb Ethernet interface to enable access to the SO-DIMM DDR5 Tester over the local network infrastructure, as well as an on-board 64Mb HyperRAM for storing critical runtime data.
Thunderbolt to GPU Adapter

Adapter board wrapping 4-lane (i.e. 4x) PCIe Gen 3.0 devices into a Thunderbolt 3 uplink. It is based on the Intel/JHL6340SLLSQ Thunderbolt controller.
Thunderbolt to PCIe Adapter

Open source adapter exposing PCIe over Thunderbolt. Offers high throughput and low latency and allows for range extension. It is based on the Intel/JHL6340SLLSQ Thunderbolt controller. Compatible with NVIDIA Jetson Orin SoMs through the Jetson Orin Baseboard.

C1005X6S1A105K050BC