OCuLink to PCIe adapter
This board break-routes a regular OCuLink x4 connector into x16 PCIe edge card slot. It was designed for use with Antmicro Jetson Orin Baseboard OCuLink Expansion. Please inspect the schematics and verify the connection diagrams if you plan to use that board with any other OCuLink-compliant accessories. The PCB design files were prepared in KiCad 9.x
Supports 4x PCIe link via an OCuLink connector over an x16 card edge connector
PCIe cards can be powered via USB-C Power Delivery, EPS-12V or Molex Nano-Fit connector
Optional on-board PCIe clock generator for SRSI and SRNS clocking configurations
Mechanical outline optimized for dual slot PCIe cards
Image | Manufacturer | Manufacturer part number | Description | Data available |
|---|---|---|---|---|
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
| ||||
| ||||
| ||||
| ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
| ||||
| ||||
| ||||
| ||||
| ||||
| ||||
| ||||
 | ||||
| ||||
| ||||
| ||||
|
Name | Type | Material | Thickness[mm] | Constant |
|---|---|---|---|---|
F.Mask | Top Solder Mask | 0.01 | ||
F.Cu | copper | 0.035 | ||
dielectric 1 | prepreg | FR4 | 0.12 | 4.5 |
In1.Cu | copper | 0.035 | ||
dielectric 2 | core | FR4 | 1.2 | 4.5 |
In2.Cu | copper | 0.035 | ||
dielectric 3 | prepreg | FR4 | 0.12 | 4.5 |
B.Cu | copper | 0.035 | ||
B.Mask | Bottom Solder Mask | 0.01 |
Related boards
OCuLink to PCIe adapter