QuickFeather Development Board
The QuickFeather development board is based on the QuickLogic EOS S3 Sensor Processing Platform. It was designed by Antmicro in cooperation with QuickLogic. The board has been designed to keep compatibility with the Adafruit Feather ecosystem of evaluation boards, which allows the user to explore functionalities of the EOS S3 platform.
QuickLogic EOS S3 Processing Platform
mCube MC3635 accelerometer
Infineon DPS310 pressure sensor
Infineon IM69D130 MEMS microphone
16Mbit of on-board flash memory
User button and RGB LED
Powered from USB or a single Li-Po battery
Integrated battery charger
USB data signals tied to programmable logic
IO signals break-routed into general purpose pinheads
Compatible with standard 0.1" breadboards
Image | Manufacturer | Manufacturer part number | Description | Data available |
|---|---|---|---|---|
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
| | ||||
| | ||||
| | ||||
| | ||||
 | ||||
 | ||||
 | ||||
| | ||||
| | ||||
| | ||||
| | ||||
| | ||||
| | ||||
| | ||||
| | ||||
| | ||||
 | ||||
 |
Name | Type | Material | Thickness[mm] | Constant |
|---|---|---|---|---|
F.Mask | Top Solder Mask | 0.01 | ||
F.Cu | copper | 0.035 | ||
dielectric 1 | core | FR4 | 0.48 | 4.5 |
In1.Cu | copper | 0.035 | ||
dielectric 2 | prepreg | FR4 | 0.48 | 4.5 |
In2.Cu | copper | 0.035 | ||
dielectric 3 | core | FR4 | 0.48 | 4.5 |
B.Cu | copper | 0.035 | ||
B.Mask | Bottom Solder Mask | 0.01 |
QuickFeather Development Board