SO-DIMM DDR5 Tester
This board allows you to develop and customize RAM controllers to implement countermeasures against Rowhammer attacks and to experiment with SO-DIMM DDR5 modules. The board contains a Xilinx Kintex-7 series FPGA in a 676-BGA package and a single USB 2.0 interface that provides access to a 4-channel FTDI transceiver to enable FPGA reconfiguration and access to the debug console.
The on-board configuration flash can store the bitstream that is loaded at startup. In addition, the board provides a 1Gb Ethernet interface to enable access to the SO-DIMM DDR5 Tester over the local network infrastructure, as well as an on-board 64Mb HyperRAM for storing critical runtime data.
Kintex-7 FPGA (XC7K160T-FFG676)
SO-DIMM DDR5 slot
HDMI output connector
Ethernet RJ45 connector with 1GbE transceiver
USB-C debug connector with FT4232HQ FTDI USB controller
JTAG
microSD card slot
16 MBytes S25FL128S QSPI FLASH memory
S27KL0641 HyperRAM
External 7-12V DC power input
Image | Manufacturer | Manufacturer part number | Description | Data available |
---|---|---|---|---|
Name | Type | Material | Thickness[mm] | Constant |
---|---|---|---|---|
F.Mask | Top Solder Mask | 0.01 | ||
F.Cu | copper | 0.018 | ||
dielectric 1 | prepreg | 1080(69%)+106(74%)S1000-2MB | 0.14 | 3.9 |
In1.Cu | copper | 0.018 | ||
dielectric 2 | core | FR4 | 0.1 | 4.3 |
In2.Cu | copper | 0.018 | ||
dielectric 3 | prepreg | 1080(69%)+106(74%)S1000-2MB | 0.14 | 3.9 |
In3.Cu | copper | 0.018 | ||
dielectric 4 | core | FR4 | 0.1 | 4.3 |
In4.Cu | copper | 0.018 | ||
dielectric 5 | prepreg | 1080(69%)+106(74%)S1000-2MB | 0.14 | 3.9 |
In5.Cu | copper | 0.018 | ||
dielectric 6 | core | FR4 | 0.1 | 4.3 |
In6.Cu | copper | 0.018 | ||
dielectric 7 | prepreg | 1080(69%)+106(74%)S1000-2MB | 0.14 | 3.9 |
In7.Cu | copper | 0.018 | ||
dielectric 8 | core | FR4 | 0.1 | 4.3 |
In8.Cu | copper | 0.018 | ||
dielectric 9 | prepreg | 1080(69%)+106(74%)S1000-2MB | 0.14 | 3.9 |
In9.Cu | copper | 0.018 | ||
dielectric 10 | core | FR4 | 0.1 | 4.3 |
In10.Cu | copper | 0.018 | ||
dielectric 11 | prepreg | 1080(69%)+106(74%)S1000-2MB | 0.14 | 3.9 |
B.Cu | copper | 0.018 | ||
B.Mask | Bottom Solder Mask | 0.01 |