M.2 to OCuLink Adapter

This board is a simple M.2 (M-key) to OCuLink adapter. It can be used for connecting the on-board PCIe M.2 slots with remote PCIe devices via OCuLink cables. This board has been designed to be compatible with Antmicro's Jetson Orin Baseboard.

See on GitHub

Manufacturer	Manufacturer part number	Description
Amphenol	G14A421211112HR	I/O Connectors OCulink, Receptacle, 0.5mm pitch, 4X, R/A SMT with shell leg SMT type, 30U" gold plating, LCP, black, T&R packing
KEMET	C0402C104J4RAC7411	SMD Multilayer Ceramic Capacitor, 100nF, 50V, 0402, ±5%, X7R
Panasonic	ERJ2GE0R00X	SMD Chip Resistor, Jumper, 0 ohm, 100 mW, 0402 [1005 Metric], Thick Film, General Purpose
Bourns	CR0201-FX-0R00GLF	SMD Chip Resistor

Name	Type	Material	Thickness[mm]	Constant
F.Mask	Top Solder Mask		0.01
F.Cu	copper		0.035
dielectric 1	prepreg	7628	0.1855	4.2
In1.Cu	copper		0.035
dielectric 2	core	FR4	0.23	4.2
In2.Cu	copper		0.035
dielectric 3	prepreg	7628	0.1855	4.2
B.Cu	copper		0.035
B.Mask	Bottom Solder Mask		0.01

If you would like us to create a similar board for you, click here and fill out the form Contact us

Related boards

Jetson Orin Baseboard

World's first open-source baseboard supporting NVIDIA Jetson Orin Nano and Jetson Orin NX System-on-Modules, and successor to the greatly popular Jetson Nano Baseboard. The board will help you harness Orin NX's performance while offering plenty of flexibility - it can be powered using three possible sources (PoE included), features an array of interfaces, and offers compatibility with a range of video accessories developed by Antmicro (e.g. adapters for FRAMOS and Allied Vision cameras). All that while fitting within a 120 x 60 mm footprint. Read more about the Jetson Orin Baseboard on Antmicro's blog.
Jetson Orin Baseboard OCuLink Expansion Board

This board is a PCIe to OCuLink adapter that connects to the expansion port on the Jetson Orin Baseboard, allowing PCIe devices to be connected via the OCuLink interface.
OCuLink to PCIe adapter

This board break-routes a regular OCuLink x4 connector into x16 PCIe edge card slot. It was designed for use with Antmicro Jetson Orin Baseboard OCuLink Expansion. Please inspect the schematics and verify the connection diagrams if you plan to use that board with any other OCuLink-compliant accessories. The PCB design files were prepared in KiCad 9.x

M.2 to OCuLink Adapter