PoE to USB-C PD Adapter
This board is designed to accept an IEEE 802.3bt Ethernet input with Power over Ethernet (PoE) and provide power to connected devices via USB-C Power Delivery, while maintaining uninterrupted Ethernet signal pass-through for data transmission.
The board negotiates power with Power Sourcing Equipment (PSE) and operates as a USB-C Upward-Facing Port (UFP) power source on the USB-C interface. It integrates full VBUS power monitoring circuitry, enabling precise measurement and supervision of voltage, current, and power on the USB-C supply rail.
The design is well suited for systems that require Ethernet connectivity and USB-C PD power input, but do not natively support PoE, enabling seamless deployment in PoE-powered network environments without additional external adapters.
112.00 mm X 56.00 mm PCB size
Automatic input power negotiation (up to 71W from PSE)
IEEE 802.3bt Ethernet receptacles
USB-C Power Delivery
External programmable flash
Programmable USB-PD power levels up to over 60W
VBUS voltage, current and power measurement
Fan driver with 4 pin standard receptacle
Image | Manufacturer | Manufacturer part number | Description | Data available |
|---|---|---|---|---|
Name | Type | Material | Thickness[mm] | Constant |
|---|---|---|---|---|
F.Mask | Top Solder Mask | 0.01 | ||
F.Cu | copper | 0.035 | ||
dielectric 1 | prepreg | FR4 | 0.12 | 4.5 |
In1.Cu | copper | 0.035 | ||
dielectric 2 | core | FR4 | 1.2 | 4.5 |
In2.Cu | copper | 0.035 | ||
dielectric 3 | prepreg | FR4 | 0.12 | 4.5 |
B.Cu | copper | 0.035 | ||
B.Mask | Bottom Solder Mask | 0.01 |