Framos CSI Adapter
This small and lightweight board connects to the FRAMOS Sensor Module Adapter (FSA) and exposes a 30-wire I-PEX micro coax cable.
The adapter board is the same size as the FSA and can be stacked with it. The adapter board can be interfaced with a variety of video processing platforms created by Antmicro using the Dual I-PEX CSI Interposer. The I-PEX connector can be optionally replaced with an FFC. Additionally, the FRAMOS CSI Adapter includes circuitry which makes it electrically compatible with the MIPI camera interfaces exposed on Antmicro’s platforms.
You can learn more about the adapter on Antmicro's blog
MIPI CSI-2 camera interface
On-board DC-DC converters to power the FSA board and camera module
I2C bus voltage level translator
DF40C-60DS connector for FRAMOS Sensor Module Adapter
MSAK24025 Series 30-pin IPEX-type connector
Image | Manufacturer | Manufacturer part number | Description | Data available |
|---|---|---|---|---|
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
 | ||||
| | ||||
| | ||||
| | ||||
| | ||||
| | ||||
| |
Name | Type | Material | Thickness[mm] | Constant |
|---|---|---|---|---|
F.Mask | Top Solder Mask | 0.01 | ||
F.Cu | copper | 0.035 | ||
dielectric 1 | core | FR4 | 0.48 | 4.5 |
In1.Cu | copper | 0.035 | ||
dielectric 2 | prepreg | FR4 | 0.48 | 4.5 |
In2.Cu | copper | 0.035 | ||
dielectric 3 | core | FR4 | 0.48 | 4.5 |
B.Cu | copper | 0.035 | ||
B.Mask | Bottom Solder Mask | 0.01 |
